How big is the field of orgonite? How to measure the field of Orgonite?

Orgonite Pendant

Use dowsing rods to measure the field of Orgonite.

The Black Sun Orgonite Pendants by Orgonite Austin have a diameter of 115 feet across. That’s 57 feet in every direction. 

Today I measured the distance of my orgonite pendants with dowsing rods.  My little pendants go 57 feet in every direction.  That means the people in the cars next to you will be in the field too. 

What makes the field bigger?  Is it the size of the orgonite?  Is it the shape?  Is it the ingredients?  Or does it depend on the alignment of the planets and the energy of the person?  We could even go so far as to say the intent could influence it.

Wouldn’t you expect a bigger piece of orgonite to have the bigger field? I did.  I encountered some unexpected results.  The big piece which is four times larger than the small one, Has the same size of field as the large one.

 But when we wrap copper wire to the outside of the orgonite, the field more than doubles in size.   Why does rapping orgonite and copper double the size of the field? I have an idea.

If we look at the nature of metal and what it does when interacting with phenomenon’s of electromagnetism, copper acts like a mirror, and/or a waterhose. both move ‘energy’.

In traditional science the electrons slide along the outside of the copper. Copper does not absorb and move current through it. It moves ‘energy’ along the surface of the metal. So when copper encounters orgone energy, the orgone energy moves, is enhanced, or projected. 

We don’t know what’s going on. All we have is the ability to measure the edge of it. Copper increases the distance of the field of orgonite.   

I measured several pieces with different ingredients, but the same shape. The difference in ingredients (inside the orgonite) increased the size of the field minimally when compared to adding ingredients to the outside (copper).

The most effective way to increase the field of the original Black Sun Orgonite recipe is to add copper to the outside. I have not yet found a profound way to increase the field with ingredients inside. But wrapping it in copper more than doubles its area of influence.

Traditional black sun orgonite does not include platinum.   Mine does includes Platinum. I made three pieces. 1) with platinum. 2) with out platinum. 3) and one with both platinum and gold. All of these pieces had the same size of field.  But the one with gold was 6 feet larger then the two without gold. 

Did your mind just say that “Obviously gold makes it bigger, and platinum doesn’t.” Did it? The observation is that the one with gold is bigger. A different observation (and this one is going to throw you for a loop), the platinum is INSIDE the orgonite. The gold is OUTSIDE of the orgonite.

So now observation tells us that metal on the outside makes the field of orgonite bigger. The truest and final test is to make one pendant with gold as it is (on the OUTSIDE of the pendant), and make one with gold INSIDE of the pendant.

I expected more metals inside the orgonite to equal a larger field.  That was not the case. Adding metals on the OUTSIDE made it bigger. The gold pendant technically has gold on the outside. 

This experiment revealed the bigger fields are created by putting metals on the outside of orgonite.

Text experiment would be to use different ingredients and measure the field.  And the next experiment would be to try the same shape but different sizes. Like a big  pyramid and a small pyramid, then measure the fields. By the way, the Giza pyramids have a lot of calcite. Calcite has an extremely high responsive rate to being squeezed, aka the piezo electric effect. Because of that pyramid I use excessive calcite in these pendants. 

Here’s something to think about. We tested orgonite with copper wire wrapped around it. What happens when we test orgonite with copper pipes coming out of it? And what do we call orgonite that has copper pipes coming out of it?  A cloudbuster. 

A cloudbuster is a huge piece of orgonite (5 gallon bucket) with copper pipes coming out of it. That setup with copper pipes sends orgone energy far far away into the sky.  Pendants create a field. Cloudbusters create a beam of influence.

This article begin with the intent of measuring field, which is done intuitively and spiritually with dowsing rods. We’ve now gone beyond measuring it, and into what influences it. We’re looking at the facts. This is how to influence the size of the field. It’s done with metal on the outside.

Wrapping your orgonite with copper creates a large radius or field of influence.  Using copper pipes sends the orgone energy far away and up into the sky.  

So now we’re looking at the fact that using Metals inside of it does not increase it’s field of influence. But metal on the outside does in fact increase the field of influence. As far as the proper way to wrap orgonite with copper wire, I have a video on my YouTube channel titled:  “Orgonite coil Wrapping”.  A link is at the bottom of this page.

On this premises wrapping copper around orgonite, the wrap needs to have a flow to it. Chaos spaghetti rapping around orgonite is not going to be a consistent movement of orgone energy. I like to think of this phenomenon as a water hose.

As a water hose begins moving water or orgone energy, the momentum is consistent unless there’s a kink in the hose.  So wrap it with a flow that looks and feels good.

As this technology is new for this planet we don’t have any concrete evidence or principles of how this doesn’t does not work.  We only have guidelines from our experience and observations. The majority of our learning of this technology comes through our experience with its subtle energies.  

My favorite way to find out what is going on is to construct a piece and take it to a friend who is psychically and intuitively sensitive.   That friend gives me their opinion on the energy of the orgonite. It’s amazingly ironic how accurate their depiction of its energy coincides with the characteristics of the ingredients used.

I blind a this friend. She had no idea what ingredients were inside the orgonite. Everything she said was right on the money. 

The greatest example of her take on its energy was with the orgonite contained in dog fur and squirrel fur.   She said the energies were constantly moving towards and away from each other and that they would never blend, but they would never separate. There was constant ebb and flow of  these energies.

And if we think about the way squirrels and dogs interact with each other, the dog chases the squirrel, but the squirrel never leaves. It stays around to torment the dog.  A link to these videos are at the end of the page under “TOE” (Tuning Orgone Energy) They’re awesome videos !

It appears this article is going into a rabbit hole other than how to measure the field of orgonite or how to measure the distance of the field. The way we measure the field of orgonite is with dowsing rods.  And a cool thing about the spiritual realm is if we want to measure the field of an object that is NOT in our possession, we can simply imagine it on the ground in front of us and use the dowsing rods to measure it.

The spiritual world is so vast and complex, and yet with a unique platform of organization. In my opinion it actually has more structure and organization than this physical world. If that’s where this world came from, it had better be more organized than this world. LOL.

As long as I’m here in this world I’ll give everything I have to it. I expect I have another 30 years to make this world a better place. I’m confident that I will never see the fruits of my labors. But I will spend the rest my life planting seeds. Thank you for reading this post. May the Schwartz be with you.

This is Orgonite Austin. You know I love you. 

🙂

My book is available at www.TheScienceOfRain.com

Orgonite Coil Wrapping 

“TOE” Tuning Orgone Energy 

dowin

Hey everyone. We all have areas where we're better than the average Joe. My area of expertise is electromagnetics. I invented Black Sun Orgonite. My book is titled: The Science Of Rain. I discovered how fossil fuels fill the sky with positive ions which stops humidity from turning into clouds. I see in my minds eye the subject of electromagnetics through images. Someone once said geniuses think in images. I'd sure like to think so. But the more you learn, the less you know. I'm fascinated by fields of charge, which is what an atom is. I truly do think in images, and come up with some ingenious ideas. I'd like to say I'm really smart, but the truth is, I see how much I don't know. It's challenging to teach from the leading edge, because on the verge of discovery, we stand in the unknown. I can show you what I've seen. I can show you my experiences. I can tell you what's real, according to my experiences and the definition of real. But the truth is; the only way anyone can truly know something, is to experience it. The purpose of this website is to inform you and all that seek truth, of what makes orgonite real and valid. Don't buy mass produced orgonite. It must be made by hand. It must be made with love. Sincerely, Dowin Gardner aka Orgonite Austin

2 thoughts on “How big is the field of orgonite? How to measure the field of Orgonite?

  1. The sky cleared when I ran a Keshe field through (what was initially your)structural links. I did this by putting a stronger pad on one side and a weaker pad on the other. 2 things I noticed: first, the wind kicked up a lot. second, and this is what interests me(as far as your observations), the sky was very clear horizontally. That is, the sky was much clearer all the way across the bay. Now, I don’t know if this was due to the stronger wind, or due to the energy field extending out that far. I would think, using a cloudbuster with Keshe pads, would clear this up a bit, as the copper pipes should shoot the energy mostly straight up(you could see if it now goes to the side more.).

Leave a Reply

Recent Content